|+49 (0) 8405 / 9259-0|
|Contact us via email|
The Tank-O-Matic coolant tank is used for easy filling and venting of a water cooling system. It can be mounted anywhere on the inside or outside of the housing and independently of the pump, allowing the coolant level to be checked at any time and corrected if necessary.
Made of solid aluminum and acrylic glass, the coolant tank can be mounted in just a few steps and is also a real eye-catcher in terms of appearance. For easy opening, the screwed lid has a knurling, which makes it very handy. The bottom module is also screwed to the acrylic glass tube, which increases safety once again. Of course, the coolant tank is absolutely tight in any installation position and thus 100 percent safe.
The coolant tank finds the necessary connection via its two 10/8-mm connections already included in the scope of delivery, which are screwed into two 1/4-inch threads in the base module. Also included are two flow tubes that allow the user to adjust the inflow and outflow of the coolant within the tank.
Mounting the coolant tank is extremely easy thanks to the included brackets. In addition to mounting using the retaining clips, the Tank-O-Matic can also be prescribed from below using its M5 thread in the base.
Scope of delivery:
- 1x Tank-O-Matic coolant tank - silver/transparent
- 2x Tank-O-Matic mounting bracket - black
- 2x flow tube (1x short, 1x long)
- 2x connection 1/4 inch to 10/8 mm (8x1) - straight
- Mounting material
- Instruction manual
|Colour:||Transparent / Silver|
|Dimensions:||50 x 50 x 280 mm (LxBxH)|
|Material:||Anodized aluminum, acrylic glass|
|Weight:||ca. 540 g|
|Tank volume:||280 ml|
|Connector:||2x 10/8 mm (8x1)|
|Thread:||2x 1/4 inch (BSP/G)|