|+49 (0) 8405 / 9259-0|
|Contact us via email|
The innovatek water temperature sensor for two 10/8-mm hoses allows direct measurement of the water temperature in the cooling circuit and thus extremely accurate measurement of the coolant.
The application is very simple: Simply disconnect the hose at a suitable point and then connect it to the two 10/8-mm connectors on the water temperature sensor, then connect the 2-pin connector to a fan controller.
The sensor itself is thermally connected to the cooling medium with a special copper carrier made of high-purity copper. If copper alloys such as brass were used, the result would otherwise be distorted. To ensure optimum corrosion resistance, the housing is also nickel-plated.
- Temperature measurement directly in the coolant flow
- No flow reduction
- Absolutely corrosion resistant
- Simple and safe hose attachment with screw connection
- Fast and safe handling
|Pressure:||max. 4 bar|
|Dimensions:||85 x 40 x 25 mm (LxBxH)|
|Connector:||2x 10/8 mm (8x1)|
|Interface:||2-Pol (ca. 100 cm Kabellänge)|
|Measuring range (°C):||-50 °C bis 90 °C|