Products from innovatek OS GmbH

innovatek is the expert for water cooling and cooling systems for heat control. Our company, based in Germany, was founded in 1999 and has developed over time into one of the most competent and best suppliers of cooling systems. We also develop and produce cooling systems for industrial applications in mechanical and plant engineering, in electrical engineering, as well as opto-electronics and medical technology.
Find out more about our company and our services at www.innovatek.de.
No results were found for the filter!
With the help of the 2/2-way mini ball valve, you can prevent the flow within a cooling system. The ball valve is equipped with two 1/4 inch internal threads (BSP/G), which means that all conceivable connections with G1/4 inch threads...
€7.10 *
Practical 60-cm long Molex extension, for example to extend the 3-pin Molex cable of fans. Besides the two cables for the necessary voltage, the cable for monitoring the speed is also extended.
€1.40 *
Practical 30 cm long Molex extension , for example to extend the 3-pin Molex cable of fans. In addition to the two cables for the necessary voltage, the cable for monitoring the speed is also extended.
€0.90 *
Practical 30 cm long Molex extension , for example to extend the 4-pin Molex cable of fans, pumps, drives and similar components.
€1.90 *
Der 4pin auf 3pin Spannungs-Adapter stellt am 3pin Molex Lüfteranschluss je nach Ausführung 5V oder 7V anstelle von 12V (wie normal) zur Verfügung. So können z.B. Gehäusefans mit dieser reduzierten Spannung betrieben werden, was zu einer...
€2.60 *
Der 4pin auf 3pin Spannungs-Adapter stellt am 3pin Molex Lüfteranschluss je nach Ausführung 5V oder 7V anstelle von 12V (wie normal) zur Verfügung. So können z.B. Gehäusefans mit dieser reduzierten Spannung betrieben werden, was zu einer...
€2.60 *
The classic 4-pin Molex connectors are still widespread today, especially in the PC sector. With the help of the 12 V (push-in) to 4-pin Molex adapter , our powerful and extremely reliable cooling systems and pumps with push-in...
€3.95 *
With the help of this adapter cable you can lead off a 3-pin Molex connector from an existing 4-pin/4-pol Molex line. Thereby the original line remains and is not lost - as usual with many adapters.
€2.30 *
Nickel-plated brass adapter from G1/8-inch internal thread to G1/4-inch internal thread. With the help of this adapter you can quickly change the thread size and also have access to a larger selection of suitable connections with...
€3.80 *
The AGB-O-Matic coolant tank is used for easy filling and venting of the water cooling . The coolant tank is plugged directly onto a pump from the HPPS family or an EHEIM pump (12V, 1048, 1046 or variants based on the 1046) - without any...
€25.90 *
Diese komplette Antriebseinheit dient sowohl als Ersatzteil aber auch als Umrüstsatz falls Sie z.B. auf Vollkeramiklagerung umsteigen wollen. Die Vollkeramiklagerung bietet den Vorteil des geringeren Verschleisses sowie eine erhöhte...
€19.90 *
Diese komplette Antriebseinheit dient als Ersatzteil. Die Lieferung erfolgt inclusive Magnet, Impellerrad sowie Keramikachse und Gummilagern.
€12.90 *
Diese komplette Antriebseinheit dient sowohl als Ersatzteil aber auch als Umrüstsatz falls Sie z.B. auf Vollkeramiklagerung umsteigen wollen. Die Vollkeramiklagerung bietet den Vorteil des geringeren Verschleisses sowie eine erhöhte...
€19.90 *
Diese komplette Antriebseinheit dient als Ersatzteil. Die Lieferung erfolgt inclusive Magnet, Impellerrad sowie Keramikachse und Gummilagern.
€12.90 *
Mit der Antriebseinheit HPPS Vollkeramiklager kann mit wenigen Handgriffen eine bestehende EHEIM 1046 230 V Pumpe umgerüstet oder das Keramiklager einer HPPS Plus ersetzt werden. Das Vollkeramiklager bietet den Vorteil des deutlich...
€19.90 *
Mit der Antriebseinheit HPPS i Vollkeramiklager kann mit wenigen Handgriffen eine bestehende EHEIM 1048 230 V Pumpe umgerüstet oder das Keramiklager einer HPPS i ersetzt werden. Das Vollkeramiklager bietet den Vorteil des deutlich...
€19.90 *
With the help of the bulkhead connector for 2x 10/8 mm hoses, you can route the cooling liquid through thin walls (e.g. of computer / server housings). The connector is made of nickel-plated brass. The connector can be installed in a few...
€3.60 *
White filter cartridge made of nylon with a fineness of low 100 µm for the particle filter type 10 inch. The low fineness of 100 µm is necessary for all cooling systems where sensitive pressure regulators or even measuring devices are...
€10.90 *
White filter cartridge made of braided nylon with a fineness of low 100 µm for the particle filter type 10 inch. The low fineness of 100 µm is necessary for all cooling systems where sensitive pressure regulators or even measuring...
€10.90 *
White filter cartridge made of braided nylon with a fineness of extremely low 20 µm for the particle filter type 10 inch. The low fineness of 20 µm is necessary for all cooling systems in which particularly sensitive pressure regulators...
€11.90 *
White filter cartridge made of braided nylon with a fineness of low 50 µm for the particle filter type 10 inch. The low 50 µm fineness is necessary for all cooling systems where sensitive pressure regulators or even measuring devices are...
€10.90 *
White filter cartridge made of nylon with a fineness of low 60 µm for the particle filter type 10 inch. The low 60 µm fineness is necessary for all cooling systems in which particularly sensitive pressure regulators or also...
€11.90 *
Brown filter cartridge made of nylon with a fineness of 150 µm for the particle filter type F10. At a flow rate of 280 liters per hour, this filter cartridge only inhibits the flow within the water cooling system by around 0.2 bar. The...
€6.90 *
Gray filter cartridge made of nylon with a fineness of 350 µm for the particle filter type F10. At a flow rate of 380 liters per hour, this filter cartridge only inhibits the flow within the water cooling system by around 0.2 bar. The...
€6.90 *
Viewed