EPDM hose 19/13 mm - black
Usually available from stock. Should there be a delay, we will of course inform you. 
We will cut this product to the quantity you require. It is therefore not possible to return the item. The black 19/13 mm hose made of ethylene-propylene-diene rubber (EPDM) for water cooling systems offers a very high operating pressure, an extremely long application time and - thanks to high ozone resistance and UV stabilisation - is particularly suitable for industrial outdoor use.
In addition to its excellent workmanship, the EPDM hose also offers good protection against diffusion and good resistance to a wide range of chemicals (acids, alkalis, polar solvents, ...) with the exception of mineral oils and greases.
Due to its wall thickness of 3.5 mm, the EPDM hose also has a high rigidity with a bending radius of up to 75 mm.
The EPDM hose is used in cooling systems within the chemical industry, laboratory and process technology, industrial construction and vehicle construction with a pressure of up to 20 bar, whereby the hose can remain in use for an unlimited period of time if used correctly.
Max. 40 m in one piece (roll), depending on availability.
Technical details:
| Outer diameter: | 19,0 mm |
| Inside diameter: | 13,0 mm |
| Wall thickness: | 3,0 mm |
| Material: | Ethylene propylene diene rubber |
| Colour: | Black |
| Bending radius: | 75 mm |
| Operating pressure: | max. 20 bar |
| Burst pressure: | 60 bar |
| Temperature resistance: | -40 °C bis 120 °C |
