The Hardware Labs Black Ice Nemesis GTS - 280 Xflow is a very powerful radiator whose soldered-in copper fins are optimally aligned for two slow-spinning 140 mm fans. In addition, the radiator offers even better utilisation of the cooling medium, as the two 1/4-inch threads have each been placed at the other end. This special design means that the flow is less inhibited and even better cooling is ensured. Thanks to this combination, an extraordinary cooling performance can easily be realised with very low running power. Of course, stronger fans can also be used on the radiator, which increases the performance even more.
Compared to its predecessor, the Nemesis GTS has an approximately 15 percent larger contact surface between the coolant and the fins, while maintaining a high flow rate. Due to its size, the radiator is therefore particularly suitable for medium-sized cooling systems, for example in computers, 3D printers, servers and similar areas of application. Thanks to the new arrangement of the soldered-in copper fins, you achieve excellent cooling performance.
The radiator has two 1/4-inch threads ex works, into which the user can screw corresponding optional connections. The necessary cooling is ensured by mounting two also optional 140 mm fans, for which the radiator has matching M4 threads (on both sides).
The heat exchanger can be mounted in any desired installation position.
|Dimensions:||326 x 153 x 29,6 mm (LxBxH)|
|Weight:||ca. 800 g|
|Material:||Brass, copper, soft solder|
|Thread:||2x 1/4 inch (BSP/G)|
|Fan:||2x 140 x 140 mm (optional)|