|+49 (0) 8405 / 9259-0|
|Contact us via email|
Straight threaded nozzle made of nickel-plated brass with a 1/4 inch thread (BSP/G) for hoses with an inner diameter of 10 mm. The connection is very resistant and durable thanks to the material used, and a pressure of up to 50 bar is no problem for the threaded grommet.
Since the thread is not sealing, this must be sealed with a suitable flat/hard seal, a sealant or also Teflon tape. When using Teflon tape, for example, it is essential to ensure that no assembly residue from the Teflon tape enters the cooling circuit.
The connection can be mounted in just a few steps, whereby a hose clamp / clip suitable for the hose used should be used for additional fixing of the hose.
When mounting in conjunction with plastic components, do not use tools and only hand-tighten the connection. If the counterpart is made of metal, the connection can be made with tools.
|Thread:||1x 1/4 inch (BSP/G)|
|Connector:||1x 10 mm|
|Pressure:||max. 50 bar|
|Temperature resistance:||-40 °C bis 120 °C|