Top seller
No results were found for the filter!
With the help of the bulkhead connector for 2x 10/8 mm hoses, you can route the cooling liquid through thin walls (e.g. of computer / server housings). The connector is made of nickel-plated brass. The connector can be installed in a few...
€3.60 *
Angled and rotatable 1/4-inch connection (BSP/G) made of nickel-plated brass for a 10/8 mm hose. This connection is ideal for avoiding tight bend radii of the hose from one component. The screw-in screw connection with soft seal can be...
€3.60 *
1/4-inch connection (BSP/G) made of nickel-plated brass for a 10/8 mm hose. The screw-in screw connection with soft seal can be installed in a few simple steps and, thanks to the union nut supplied, holds the 10/8 mm hose securely in...
€2.40 *
G1/4-inch connection made of nickel-plated brass for two 10/8 mm hoses. This connection is ideal for implementing multiple branches within a cooling circuit. The screw-in screw connection with soft seal can be installed in a few simple...
€4.20 *
Angled and rotatable 1/8-inch connection (BSP/G) made of nickel-plated brass for a 10/8 mm hose. This connection is ideal for avoiding tight bend radii of the hose from one component. The screw-in screw connection with soft seal can be...
€4.20 *
1/8-inch connection (BSP/G) made of nickel-plated brass for a 10/8 mm hose. The screw-in screw connection with soft seal can be installed in a few simple steps and, thanks to the union nut supplied, holds the 10/8 mm hose securely in...
€2.50 *
G1/8-inch connection made of nickel-plated brass with EPDM seal for a 10/8 mm hose. The screw-in screw connection with soft seal can be installed in a few simple steps and, thanks to the union nut supplied, holds the 10/8 mm hose...
€2.50 *
High-quality connector made of aluminum for one 12/10 mm and one 10/8 mm hose. This connection is ideal for increasing or reducing the possible diameter of a hose within a cooling system. The connection can be installed in a few simple...
€5.20 *
High quality angled connector made of nickel-plated brass for two 10/8 mm hoses. This connection is ideal to avoid tight bending radii of the hose. The connection can be installed in a few simple steps and, thanks to the union nuts...
€2.60 *
High quality connector made of nylon for one 6 mm and one 8 mm hose each. This hose nozzle is ideal for increasing or decreasing the possible diameter of a hose within a cooling system. Thanks to the material used, the hose nozzle is...
€1.60 *
High quality connector made of nylon for one 8 mm and one 10 mm hose each. This hose nozzle is ideal for increasing or decreasing the possible diameter of a hose within a cooling system. Thanks to the material used, the hose nozzle is...
€2.30 *
Connection made of nickel-plated brass for the inlet of the HPPS / EHEIM 1046/48 on a 10/8 mm hose. This connection is ideal for connecting the inlet of the pump directly to a 10/8 mm hose. The screw-in screw connection with soft seal...
€4.20 *
Connection made of nickel-plated brass for the outlet of the EHEIM 1048 on a 10/8 mm hose. This connection is ideal for connecting the outlet of the pump directly to a 10/8 mm hose. The screw-in screw connection with soft seal can be...
€4.20 *
Connection made of nickel-plated brass for the outlet of the HPPS / EHEIM 1046 on a 10/8 mm hose. This connection is ideal for connecting the outlet of the pump directly to a 10/8 mm hose. (This connection is already included in the...
€4.70 *
Straight threaded connector made of nickel-plated brass with a 1/4 inch thread (BSP/G) for hoses with an inner diameter of 8 mm . In addition to the connection, the scope of delivery also includes a matching O-ring seal. In addition, the...
€2.70 *
Angled threaded polyamide (PA6) grommet with a 3/8 inch thread (BSPT/R) for hoses with an inner diameter of 8 mm . Thanks to the material used, the connection is very resistant and durable, and a pressure of up to 10 bar is no problem...
€1.90 *
The union nut with kink protection spring (for connections for 10/8 mm hoses) is ideal for effectively preventing hoses from kinking. It is simply exchanged for the existing union nut of the connection. The union nut with anti-kink...
€2.10 *
The union nut with kink protection spring (for connections for 8/6 mm hoses) is ideal for effectively preventing hoses from kinking. It is simply exchanged for the existing union nut of the connection. The union nut with anti-kink spring...
€2.30 *
Viewed