The particle filter type 10 inch with two 1/2 inch threads can, in connection with an optional filter cartridge, excellently free the own water cooling system from suspended matter and other impurities. The type 10 inch is considerably larger than the models F10 and F20 and is equipped with the optional filter cartridges made of nylon in different degrees of fineness from 50 to 100 µm which are available from us:
- Cartridge for particle filter type 10 inch - 100 µm
- Cartridge for particle filter type 10 inch - 100 µm, braided
- Cartridge for particle filter type 10 inch - 60 µm
- Cartridge for particle filter type 10 inch - 50 µm, braided
- Cartridge for particle filter type 10 inch - 20 µm, braided
The installation of the filter is very simple: Insert the selected filter cartridge, screw the housing back together and then insert two connections in the cover to match the cooling system. Due to the larger 1/2-inch thread, it is recommended to use an adapter here, for example, to connect 10/8-mm hoses to the filter. Now the filter only has to be integrated in a suitable place in the water cooling system.
In addition to the high-quality workmanship, the choice of materials (polypropylene and SAN) and the use of the high-quality Perbunan seal are also convincing.
|Dimensions:||126 x 126 x 340 mm (LxBxH)|
|Temperature resistance:||max. 50 °C|
|Operating pressure:||max. 8 bar at 30 °C|
|Material:||Polypropylene (head), Stryrol Acrylonitrile (lower part)|
|Colour:||Blue / Transparent|
|Thread:||2x 1/2 inch (BSP/G)|