Electronics v2 for PCPS pump - 24 V
This circuit board can be used to replace the electronics inside an innovatek PCPS 24V pump.... more
Product information "Electronics v2 for PCPS pump - 24 V"
Usually available from stock. Should there be a delay, we will of course inform you. This circuit board can be used to replace the electronics inside an innovatek PCPS 24V pump.
The user can access the pump's control unit from under the easily removable electronics cover of the PCPS motor body (can be removed without force or tools by bending it slightly) in order to replace it with this spare part. Four programmes are available as standard, whereby the desired programme is set using a small 2-fold DIP switch and is read out when the 24V pump is started. To change the control, the two switches are set according to the following scheme:
| Silent 3: | SW1: On | SW2: On | 75 Hz |
| Silent 2: | SW1: Off | SW2: On | 85 Hz |
| Silent 1: | SW1: On | SW2: Off | 95 Hz |
| Normal: | SW1: Off | SW2: Off | 110 Hz |
When replacing, ensure that the corresponding connections to the circuit board are restored.
Technical details:
| Voltage Range: | 24 V DC |
| Electrical interface: | 2-Pin Push-In Kabelterminal |
Hint!
Hint!
Viewed