Connections sorted by hose inner diameter

Close filters
  •  
  •  
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
1 From 4
No results were found for the filter!
Bulkhead connector for 2x 10/8 mm (8x1) - straight Bulkhead connector for 2x 10/8 mm (8x1) - straight
With the help of the bulkhead connector for 2x 10/8 mm hoses, you can route the cooling liquid through thin walls (e.g. of computer / server housings). The connector is made of nickel-plated brass. The connector can be installed in a few...
€3.60 *
Connection G1/4 inch to 10/8 mm (8x1) - 90 degree angle Connection G1/4 inch to 10/8 mm (8x1) - 90...
Angled and rotatable 1/4-inch connection (BSP/G) made of nickel-plated brass for a 10/8 mm hose. This connection is ideal for avoiding tight bend radii of the hose from one component. The screw-in screw connection with soft seal can be...
€3.60 *
Connection G1/4 inch to 10/8 mm (8x1) - straight Connection G1/4 inch to 10/8 mm (8x1) - straight
1/4-inch connection (BSP/G) made of nickel-plated brass for a 10/8 mm hose. The screw-in screw connection with soft seal can be installed in a few simple steps and, thanks to the union nut supplied, holds the 10/8 mm hose securely in...
€2.40 *
Connection G1/4 inch to 2x 10/8 mm (8x1) - T-Splitter Connection G1/4 inch to 2x 10/8 mm (8x1) -...
G1/4-inch connection made of nickel-plated brass for two 10/8 mm hoses. This connection is ideal for implementing multiple branches within a cooling circuit. The screw-in screw connection with soft seal can be installed in a few simple...
€4.20 *
Connection G1/4 inch to 6/4 mm (4x1) - 90 degree angle Connection G1/4 inch to 6/4 mm (4x1) - 90...
Angled and rotatable G1/4-inch connection made of nickel-plated brass for a 6/4-mm hose. This connection is ideal for avoiding tight bend radii of the hose from one component. The screw-in screw connection with soft seal can be installed...
€3.60 *
Connection G1/4 inch to 6/4 mm (4x1) - straight Connection G1/4 inch to 6/4 mm (4x1) - straight
G1/4-inch connection made of nickel-plated brass for a 6/4-mm hose. The screw-in screw connection with soft seal can be installed in a few simple steps and, thanks to the union nut supplied, holds the 6/4 mm hose securely in place. Never...
€3.10 *
Connection G1/4 inch to 8/6 mm (6x1) - 90 degree angle Connection G1/4 inch to 8/6 mm (6x1) - 90...
Angled and rotatable 1/4-inch connection (BSP/G) made of nickel-plated brass for an 8/6 mm hose. This connection is ideal for avoiding tight bend radii of the hose from one component. The screw-in screw connection with soft seal can be...
€3.90 *
Connection G1/4 inch to 8/6 mm (6x1) - straight Connection G1/4 inch to 8/6 mm (6x1) - straight
G1/4-inch connection made of nickel-plated brass for an 8/6 mm hose. The screw-in screw connection with soft seal can be installed in a few simple steps and, thanks to the union nut supplied, holds the 8/6 mm hose securely in place....
€2.90 *
Connection G1/8 inch to 10/8 mm (8x1) - 90 degree angle Connection G1/8 inch to 10/8 mm (8x1) - 90...
Angled and rotatable 1/8-inch connection (BSP/G) made of nickel-plated brass for a 10/8 mm hose. This connection is ideal for avoiding tight bend radii of the hose from one component. The screw-in screw connection with soft seal can be...
€4.20 *
Connection G1/8 inch to 10/8 mm (8x1) - straight Connection G1/8 inch to 10/8 mm (8x1) - straight
1/8-inch connection (BSP/G) made of nickel-plated brass for a 10/8 mm hose. The screw-in screw connection with soft seal can be installed in a few simple steps and, thanks to the union nut supplied, holds the 10/8 mm hose securely in...
€2.50 *
Connection G1/8 inch to 10/8 mm (8x1) - straight, EPDM Connection G1/8 inch to 10/8 mm (8x1) -...
G1/8-inch connection made of nickel-plated brass with EPDM seal for a 10/8 mm hose. The screw-in screw connection with soft seal can be installed in a few simple steps and, thanks to the union nut supplied, holds the 10/8 mm hose...
€2.50 *
Connection G1/8 inch to 6/4 mm (4x1) - 90 degree angle Connection G1/8 inch to 6/4 mm (4x1) - 90...
Angled and rotatable G1/8-inch connection made of nickel-plated brass for a 6/4-mm hose. This connection is ideal for avoiding tight bend radii of the hose from one component. The screw-in screw connection with soft seal can be installed...
€4.20 *
Connection G1/8 inch to 8/6 mm (6x1) - 90 degree angle Connection G1/8 inch to 8/6 mm (6x1) - 90...
Angled and rotatable 1/8-inch connection (BSP/G) made of nickel-plated brass for an 8/6 mm hose. This connection is ideal for avoiding tight bend radii of the hose from one component. The screw-in screw connection with soft seal can be...
€4.20 *
Connector for 10/8 mm (8x1) to 12/10 mm - Aluminum, Straight Connector for 10/8 mm (8x1) to 12/10 mm -...
High-quality connector made of aluminum for one 12/10 mm and one 10/8 mm hose. This connection is ideal for increasing or reducing the possible diameter of a hose within a cooling system. The connection can be installed in a few simple...
€5.20 *
Connector for 2x 10/8 mm (8x1) - 90 degree angles Connector for 2x 10/8 mm (8x1) - 90 degree angles
High quality angled connector made of nickel-plated brass for two 10/8 mm hoses. This connection is ideal to avoid tight bending radii of the hose. The connection can be installed in a few simple steps and, thanks to the union nuts...
€2.60 *
Connector for 6 mm to 10 mm - Nylon, Straight Connector for 6 mm to 10 mm - Nylon, Straight
High quality connector made of nylon for one 6 mm and one 10 mm hose each. This hose nozzle is ideal for increasing or decreasing the possible diameter of a hose within a cooling system. Thanks to the material used, the hose nozzle is...
€1.70 *
Connector for 6 mm to 8 mm - Nylon, Straight Connector for 6 mm to 8 mm - Nylon, Straight
High quality connector made of nylon for one 6 mm and one 8 mm hose each. This hose nozzle is ideal for increasing or decreasing the possible diameter of a hose within a cooling system. Thanks to the material used, the hose nozzle is...
€1.60 *
Connector for 8 mm to 10 mm - Nylon, Straight Connector for 8 mm to 10 mm - Nylon, Straight
High quality connector made of nylon for one 8 mm and one 10 mm hose each. This hose nozzle is ideal for increasing or decreasing the possible diameter of a hose within a cooling system. Thanks to the material used, the hose nozzle is...
€2.30 *
Grommet with union nut, G1 inch (IT) on 20 mm - PP Grommet with union nut, G1 inch (IT) on 20 mm - PP
Angled grommet made of glass-fiber reinforced polypropylene (PP) with a union nut, which has a 1-inch female thread (BSP/G) and an EPDM flat seal. The connection is suitable for hoses with an inner diameter of 20 mm . Thanks to the...
€2.10 *
Grommet with union nut, G1/2 inch (IT) on 13 mm - PP, Grommet with union nut, G1/2 inch (IT) on 13 mm...
Angled gray-blue grommet made of glass-fiber reinforced polypropylene (PP) with a union nut, which has a 1/2-inch female thread (BSP/G) and an EPDM flat seal. The connection is suitable for hoses with an inner diameter of 13 mm . Thanks...
€2.50 *
Grommet with union nut, G1/2 inch (IT) on 13 mm - PP, black Grommet with union nut, G1/2 inch (IT) on 13 mm...
Angled black grommet made of glass-fiber reinforced polypropylene (PP) with a union nut, which has a 1/2-inch female thread (BSP/G) and an EPDM flat seal. The connection is suitable for hoses with an inner diameter of 13 mm . Thanks to...
€2.50 *
Inlet for HPPS / EHEIM 1046/48 on 10/8 mm (8x1) - straight Inlet for HPPS / EHEIM 1046/48 on 10/8 mm (8x1)...
Connection made of nickel-plated brass for the inlet of the HPPS / EHEIM 1046/48 on a 10/8 mm hose. This connection is ideal for connecting the inlet of the pump directly to a 10/8 mm hose. The screw-in screw connection with soft seal...
€4.20 *
Outlet for EHEIM 1048 on 10/8 mm (8x1) - straight Outlet for EHEIM 1048 on 10/8 mm (8x1) - straight
Connection made of nickel-plated brass for the outlet of the EHEIM 1048 on a 10/8 mm hose. This connection is ideal for connecting the outlet of the pump directly to a 10/8 mm hose. The screw-in screw connection with soft seal can be...
€4.20 *
Outlet for HPPS / EHEIM 1046 on 10/8 mm (8x1) - straight Outlet for HPPS / EHEIM 1046 on 10/8 mm (8x1) -...
Connection made of nickel-plated brass for the outlet of the HPPS / EHEIM 1046 on a 10/8 mm hose. This connection is ideal for connecting the outlet of the pump directly to a 10/8 mm hose. (This connection is already included in the...
€4.70 *
1 From 4
Viewed

MADE IN GERMANY


We develop and produce in Germany.