|+49 (0) 8405 / 9259-0|
|Contact us via email|
Angled threaded polyamide (PA6) grommet with a 3/8 inch thread (BSPT/R) for hoses with an inner diameter of 10 mm. Thanks to the material used, the connection is very resistant and durable, and a pressure of up to 10 bar is no problem for the threaded grommet.
Since the conical thread is not sealing, this must be sealed with, for example, a suitable sealant or also Teflon tape. When using Teflon tape, for example, it is essential to ensure that no assembly residues from the Teflon tape enter the cooling circuit.
The connection can be mounted in just a few steps, although a hose clamp matching the hose used should be used for additional fixation of the hose. Never use tools during assembly and only hand-tighten the connection.
|Thread:||1x 3/8 Zoll (BSPT/R)|
|Connector:||1x 10 mm|
|Pressure:||max. 10 bar|
|Temperature resistance:||-40 °C bis 90 °C|
|Angle:||Yes, 90 degrees|