|+49 (0) 8405 / 9259-0|
|Contact us via email|
The AGB-O-Matic coolant tank is used for easy filling and venting of the water cooling. The coolant tank is plugged directly onto a pump from the HPPS family or an EHEIM pump (12V, 1048, 1046 or variants based on the 1046) - without any tools.
Thanks to the clever internal structure of the return and the internal flow geometry of the AGB-O-Matic, the pump sucks in the coolant absolutely free of bubbles, which means that the cooling circuit is vented very quickly and effectively. The inflowing cooling liquid is directed past the pump inlet, which means that air bubbles can no longer be sucked in. In addition, the suction point is located in the middle of the AGB-O-Matic, which means that the pump always draws in from the water - regardless of the position of the coolant tank.
Despite the compact design, the coolant tank provides an astonishingly large filling volume. After installation, the water cooling system is filled quickly and easily through the yellow filler opening on the top.
The coolant tank is made of extremely stable special plastic and is equipped with a 10/8 mm connection on the return in the lid as standard. Thanks to the 1/4 inch thread, however, the user can also use other suitable connections, e.g. for other hose diameters.
Note: Not suitable for use with isopropanol.
|Dimensions:||50 x 56 x 120 mm (LxBxH)|
|Material:||Highly tough special plastic|
|Weight:||ca. 110 g|
|Tank volume:||150 ml|
|Connector:||1x 10/8 mm (8x1)|
|Thread:||2x 1/4 inch (BSP/G)|